Groundswell Chassis Flusher

The JETT Chassis Flusher ensures your 4WD’s chassis stays pristine. No more worrying about build-up of mud, sand and dirt leading to RUST and CORROSION of your 4WD Chassis! Teaming up with a Mechanical Engineer for 4WD’s, Groundswell have spent 18 months perfecting the Jett Chassis Flusher. Every tweak, every improvement has been made to bring you the most efficient, thorough cleaning experience for your 4WD’s Chassis. It has been engineered to provide a thorough clean, reaching areas that are often missed!

FEATURES

1. The Jett: Our flusher uses cutting-edge technology, that uses high-pressure jets to efficiently and effectively blast away dirt, grit, and debris.
2. Revolutionary Hose Design: Featuring a 12mm OD hose with no memory, it stays pliable and never folds back on itself, making your cleaning job easier than ever.
3. Innovative angled 12-Jett Nozzle: The angled water jet forces all debris to the rear and out, preventing any build-up between chassis points. It offers a top-to-bottom flush like no other.
4. Full Chassis Clean in One Swoop: Clean your entire chassis in one swift motion without the hassle of moving around and potentially missing spots. Our Chassis Flusher ensures a complete end-to-end clean.
5. Premium Wash Canister: Equipped with a premium wash canister, it delivers a thorough clean that leaves your chassis spotless.
6. Proudly Australian Made: Designed, machined, and assembled on the Sunshine Coast, our Jett Chassis Flusher is a testament to local craftsmanship and quality.

HOW TO USE YOUR CHASSIS FLUSHER

1. Start: Fill the canister with Groundswell Premium Wash concentrate.
2. Connect: Connect the Jett chassis flusher to the hose.
3. Feed The Hose: Simply feed the chassis flusher hose into your chassis rail with water off.
4. Any Resistance: If it hits a bolt/resistance and wont feed any further, turn blue ball tap on for the water to start flowing. (This enables the Jett to hover in the middle of the chassis.)
5. Feed Hose: Feed all the way to the end of the chassis.
6. Power Wash: Turn on the canister to the FIRST SETTING containing the premium wash and water.
7. Agitate for Perfection: As you slowly pull the hose out, move it back and forth to ensure every inch is thoroughly cleaned until no more soap comes out.
8. Please Beware: Don’t pull out past RED INDICATOR or you will be showered too!!
9. Rinse: Feed the hose back through, switch to water mode, and pull it out slowly to rinse away all the soap.
10. Finish Up: Turn off the blue stainless steel ball tap and you can pull the Chassis Flusher out and you’re done!

Your chassis is now spotless and ready for your next adventure!